Stanley Mirrored Sliding Closet Doors Removal Instructions

Removing Stanley mirrored sliding closet doors is a straightforward task that can typically be completed in under an hour. By following these step-by-step instructions, you can safely remove your doors without damaging them or the surrounding area.

Tools and Materials:

Phillips head screwdriver
Putty knife or flathead screwdriver
Vacuum cleaner or shop vac
Clean rags

Step 1: Gather your tools and materials and locate the door's adjustment screws.

The adjustment screws are usually located at the top and bottom of each door. They may be covered by plastic caps that need to be removed.

Step 2: Loosen the adjustment screws.

Use a Phillips head screwdriver to loosen the adjustment screws. Do not remove them completely at this point.

Step 3: Position the door for removal.

Slide the door to the center of the track. This will allow you to access the rear of the door more easily.

Step 4: Remove the top roller assemblies.

Locate the top roller assemblies at the top of the door. Use a putty knife or flathead screwdriver to gently pry the assemblies away from the door frame. Once they are loose, lift them up and out of the track.

Step 5: Lift the door off the bottom track.

Once the top roller assemblies have been removed, carefully lift the door straight up to clear the bottom track. Do not tilt the door or it may damage the side panels.

Step 6: Remove the bottom roller assemblies.

Once the door is clear of the bottom track, locate the bottom roller assemblies. Use a putty knife or flathead screwdriver to gently pry the assemblies away from the door frame. Once they are loose, lift them out of the track.

Step 7: Clean the door and track.

Use a vacuum cleaner or shop vac to remove any debris from the door and track. Wipe down the door with a clean rag to remove any fingerprints or smudges.

Step 8: Reinstall the doors.

To reinstall the doors, simply follow the steps in reverse order.