How To Hang Large Mirror On Drywall

How to Hang a Large Mirror on Drywall

Hanging a large mirror on drywall can be a daunting task, but with the right tools and techniques, it can be done safely and securely. Here's a step-by-step guide to help you get the job done:

Tools and Materials You'll Need:

Large mirror
Drywall anchors (for mirrors over 20 lbs.)
Screwdriver
Drill
Hammer
Level
Tape measure
Pencil

Step 1: Determine the Location

Use a tape measure and pencil to mark the desired location for your mirror on the wall. Make sure it's centered and at the desired height.

Step 2: Install Drywall Anchors (if necessary)

For mirrors over 20 lbs., drywall anchors are recommended to provide additional support. Use a drill to create pilot holes where you marked the locations. Insert the anchors into the holes and tap them in with a hammer.

Step 3: Mark the Screw Holes

Place the mirror against the wall and align it with the markings. Use a level to ensure it's straight. Mark the screw holes through the mirror's mounting brackets onto the drywall.

Step 4: Drill Pilot Holes (optional)

For larger mirrors or thicker drywall, drilling pilot holes can make screwing easier. Use a drill bit that's slightly smaller than the screws you'll be using.

Step 5: Screw in the Brackets

Align the mirror and insert the screws into the drywall anchors or pilot holes. Tighten the screws securely using a screwdriver.

Step 6: Support the Mirror

Once the brackets are in place, support the mirror while another person helps you hang it. Carefully lift the mirror onto the brackets and secure it.

Tips:

Use a mirror lift to safely move and hang the mirror.
Consider using mirror clips for additional support, especially if the mirror is heavy.
If you're unsure about the weight of your mirror or the strength of your drywall, consult a professional.

By following these steps and tips, you can safely and securely hang a large mirror on drywall. Take your time and don't hesitate to seek professional assistance if needed.