How To Replace Bathroom Wall Mirror

How to Replace a Bathroom Wall Mirror: A Step-by-Step Guide

Replacing a bathroom wall mirror is a relatively easy task that can be completed in just a few steps. Whether you're updating the look of your bathroom or replacing a damaged mirror, this guide will help you get the job done right.

Materials You'll Need:

New bathroom mirror
Measuring tape
Level
Screwdriver or drill
Screws or mirror clips
Mirror adhesive (optional)

Step 1: Measure and Mark the Wall

Using a measuring tape and level, mark the location of the new mirror on the wall. Ensure that the mirror is centered and level.

Step 2: Remove the Old Mirror

If the old mirror is attached with screws, use a screwdriver to remove them. If the mirror is glued to the wall, gently pry it loose using a putty knife or flathead screwdriver. Be careful not to damage the wall.

Step 3: Prepare the Wall

If the old mirror was glued to the wall, remove any remaining adhesive residue. Use a damp cloth to clean the area where the new mirror will be installed.

Step 4: Install the Mirror Clips or Screws

If using mirror clips, fasten them to the wall according to the manufacturer's instructions. If using screws, drill small pilot holes into the wall and insert the screws. Ensure that the screws are flush with the wall.

Step 5: Hang the Mirror

Carefully lift the mirror and align it with the clips or screws. Gently press the mirror into place, ensuring that it is level and secure.

Step 6: Apply Mirror Adhesive (Optional)

For added stability, you can apply a thin bead of mirror adhesive around the edges of the mirror. This will help to prevent the mirror from shifting or becoming loose over time.

Step 7: Clean the Mirror

Once the mirror is installed, use a glass cleaner and a soft cloth to clean the surface and remove any smudges or fingerprints.

Tips:

Use a mirror that is the same shape and size as the old mirror.
If the new mirror is heavier than the old mirror, use more screws or clips for added support.
If the wall is uneven or has any imperfections, use shims to level the mirror.
Be patient and take your time to ensure that the mirror is installed correctly.