Remove Beveled Mirror Trim

Essential Aspects of Removing Beveled Mirror Trim

Beveled mirror trim adds a touch of elegance and sophistication to any mirror. However, if you're looking to update the look of your mirror or replace the trim, you'll need to know how to remove it properly. Here are the essential aspects of removing beveled mirror trim:

Safety First

Before you begin, it's important to take some safety precautions. Wear gloves and safety glasses to protect your hands and eyes from any broken glass or sharp edges. Also, be sure to work on a flat, stable surface.

Gather Your Tools

You will need the following tools to remove beveled mirror trim:

Putty knife or thin pry bar
Hammer or mallet
Chisel (optional)

Locate the Trim Nails

The first step is to locate the nails that are holding the trim in place. Usually, these nails are hidden under the trim itself. To find them, gently pry the trim away from the mirror using a putty knife or thin pry bar. Be careful not to damage the mirror or the trim.

Remove the Nails

Once you have located the nails, use a hammer or mallet to carefully remove them. Be sure to strike the nail straight on so that you don't damage the mirror or the trim. If the nails are difficult to remove, you can try using a chisel to gently pry them out.

Pry the Trim Off

With the nails removed, you can now pry the trim off of the mirror. Start by gently prying the trim away from the mirror using a putty knife or thin pry bar. Once you have a small gap between the trim and the mirror, you can use a hammer or mallet to gently tap the pry bar and loosen the trim.

Clean the Mirror

Once the trim is removed, you can clean the mirror to remove any adhesive or dirt that may have accumulated. Use a glass cleaner and a soft cloth to wipe down the mirror.