How To Remove Mirror Glued Wall Without Breaking

Mirrors are a great way to add light and space to any room, but they can be a pain to remove if they're glued to the wall. Trying to pry them off with a crowbar or hammer is likely to result in a shattered mirror, and even if you're able to get the mirror off in one piece, you'll probably damage the wall in the process. Fortunately, there are a few simple steps you can take to remove a glued mirror from the wall without breaking it.

Step 1: Safety First

Before you start, put on a pair of safety glasses to protect your eyes from flying glass. If the mirror is large or heavy, you may also want to wear gloves to protect your hands.

Step 2: Heat Up the Glue

The first step is to heat up the glue that's holding the mirror to the wall. You can do this with a hair dryer, heat gun, or even a can of compressed air. Hold the heat source close to the mirror, but not so close that you damage the glass. Heat the glue for a few minutes, until it starts to soften.

Step 3: Carefully Pry the Mirror Off the Wall

Once the glue has softened, you can start to pry the mirror off the wall. Use a thin, flat object, such as a putty knife or a credit card, to slide between the mirror and the wall. Be careful not to put too much pressure on the mirror, or you could crack it.

Step 4: Clean Up the Wall

Once the mirror is off the wall, you'll need to clean up the remaining glue. You can do this with a mild detergent and a damp cloth. Be sure to rinse the wall thoroughly to remove all of the soap residue.

Tips for Removing a Glued Mirror Without Breaking It

Be patient. Don't try to rush the process, or you're more likely to make a mistake and break the mirror.
Use a sharp blade. A dull blade is more likely to slip and damage the mirror.
Cut slowly and carefully. Don't try to cut through the glue all at once. Instead, make several small cuts and then gradually work your way through the glue.
Be careful not to cut yourself. Always keep your fingers away from the blade.