Storjorm Mirror With Built In Light Instructions

The Storjorm mirror with built-in light is a stylish and functional addition to any bathroom. It features a sleek, modern design with a built-in LED light that provides bright, even illumination. The mirror also has a built-in defogger to keep it clear of condensation, even after a hot shower.

Installing the Storjorm mirror is a relatively simple process. The following instructions will guide you through the steps:

1. Gather your tools and materials

Storjorm mirror with built-in light
Drill
Screwdriver
Level
Pencil
Tape measure
Screws
Anchors (if needed)

2. Choose a location for the mirror

The mirror should be placed at a height that allows you to see your reflection clearly.
It should also be placed in a location where there is plenty of natural light.
If you are installing the mirror above a sink, make sure that there is enough space between the mirror and the sink so that you can comfortably wash your hands and brush your teeth.

3. Mark the location of the holes

Once you have chosen a location for the mirror, use a level to ensure that it is level.
Then, use a pencil to mark the location of the holes for the screws.
If you are installing the mirror into drywall, you will need to use anchors.
To do this, drill a small hole for each anchor and then insert the anchor into the hole.

4. Drill the holes

Use a drill to drill the holes for the screws.
If you are drilling into drywall, make sure to use a drill bit that is the same size as the anchors.

5. Install the mirror

Place the mirror over the holes and insert the screws.
Tighten the screws until the mirror is securely in place.

6. Plug in the light

Plug the mirror's power cord into a nearby outlet.
Turn on the light switch to turn on the mirror's light.

7. Enjoy your new mirror!

Your Storjorm mirror with built-in light is now installed and ready to use.
Enjoy the bright, even illumination and the convenience of the built-in defogger.