How To Hang A Frameless Mirror On Wall With Clips

How to Hang a Frameless Mirror on a Wall with Clips

Hanging a frameless mirror on a wall with clips is a relatively simple task that can be completed in just a few minutes. However, there are a few important steps that you need to follow in order to ensure that the mirror is hung securely and safely. Here is a step-by-step guide on how to hang a frameless mirror on a wall with clips:

Materials you'll need:

Frameless mirror
Mirror clips
Measuring tape
Level
Hammer or drill
Screws or nails

Step 1: Determine the height and location of the mirror

Use a measuring tape and a level to determine the height and location of the mirror on the wall. Mark the location of the top center of the mirror on the wall with a pencil.

Step 2: Install the mirror clips

Hold the mirror clips up to the back of the mirror, aligning the top edge of the clips with the top edge of the mirror. Mark the location of the screw holes on the wall through the holes in the clips. Remove the clips from the mirror.

Step 3: Drill pilot holes (optional)

If you are hanging the mirror on a hard surface, such as concrete or brick, you may want to drill pilot holes for the screws. Use a drill bit that is slightly smaller than the diameter of the screws.

Step 4: Install the screws or nails

Insert the screws or nails into the pilot holes (if you drilled them) or directly into the wall. Leave about 1/4 inch of the screw or nail exposed.

Step 5: Hang the mirror

Align the mirror clips with the screws or nails on the wall. Carefully lift the mirror and hang it on the clips. Make sure that the mirror is level before releasing it.

Step 6: Secure the mirror

Once the mirror is hanging on the clips, use a screwdriver to tighten the screws or nails until the mirror is securely in place.

Tips:

Use mirror clips that are specifically designed for the size and weight of your mirror.
Make sure that the screws or nails are long enough to penetrate the wall by at least 1 inch.
If you are hanging a large or heavy mirror, you may want to use additional clips for support.
Always wear safety glasses when drilling or hammering.