How To Replace Side Mirror Glass Toyota Tacoma

How to Replace Side Mirror Glass on a Toyota Tacoma

Replacing the side mirror glass on a Toyota Tacoma is a relatively simple task that can be completed in under an hour with minimal tools. By following these step-by-step instructions, you can save yourself the cost of a mechanic and ensure that your Tacoma's side mirror is fully functional.

Materials You'll Need:

Replacement side mirror glass (compatible with your Toyota Tacoma model and year)
Phillips screwdriver

Step-by-Step Instructions:

Step 1: Remove the Old Mirror Glass

Locate the two Phillips screws holding the old mirror glass in place. They are typically located near the top and bottom of the mirror housing. Use the screwdriver to remove both screws.

Step 2: Disconnect the Electrical Connector

If your Tacoma has power side mirrors, there will be an electrical connector attached to the back of the old mirror glass. Gently disconnect the connector by pressing down on the release tab and pulling it straight out.

Step 3: Pull Out the Old Mirror Glass

Once the screws and electrical connector are removed, carefully pull the old mirror glass out of the housing. It may require a bit of force to break the sealant.

Step 4: Clean the Housing

Use a cloth to clean any debris or old sealant from the mirror housing. This will ensure a proper seal for the new mirror glass.

Step 5: Install the New Mirror Glass

Align the new mirror glass with the housing and gently press it into place. Make sure it is fully seated and level.

Step 6: Reconnect the Electrical Connector

If your Tacoma has power side mirrors, reconnect the electrical connector to the back of the new mirror glass.

Step 7: Secure the Mirror Glass

Locate the two Phillips screws that were removed in Step 1. Insert the screws into the holes on the mirror housing and tighten them securely.

Step 8: Test the Mirror

Adjust the new mirror glass to your desired position and ensure that it is fully functional. Move the switch to check the power side mirror (if applicable) and adjust the angle of the mirror to see properly.

Tips:

Use genuine Toyota parts for the replacement mirror glass to ensure proper fit and function.
Be careful not to overtighten the screws when securing the mirror glass.
If you have any doubts or difficulties, do not hesitate to consult a professional mechanic.