How To Install Sliding Closet Mirror Doors

Sliding closet mirror doors are a great way to add style and functionality to your closet. They're also relatively easy to install, making them a good DIY project for even beginners. Here are the essential steps on how to install sliding closet mirror doors:

Materials You'll Need:

- Sliding closet mirror doors - Measuring tape - Level - Pencil - Drill - Screws - Anchors (if needed) - Door track - Door guides

Step 1: Measure and mark the door opening

The first step is to measure the width and height of the door opening. Mark the center of the opening on the floor and ceiling.

Step 2: Install the door track

The door track is what the doors will slide on. It should be installed level and parallel to the floor. To install the door track, follow these steps: 1. Measure and mark the location of the door track on the ceiling. 2. Drill pilot holes for the screws. 3. Screw the door track into place. 4. Check that the door track is level.

Step 3: Install the door guides

The door guides help to keep the doors in place and prevent them from wobbling. To install the door guides, follow these steps: 1. Measure and mark the location of the door guides on the floor. 2. Drill pilot holes for the screws. 3. Screw the door guides into place. 4. Check that the door guides are level.

Step 4: Hang the doors

Once the door track and guides are installed, you can hang the doors. To hang the doors, follow these steps: 1. Lift the doors onto the door track. 2. Slide the doors into place until they are centered in the opening. 3. Check that the doors are level. 4. Tighten the screws on the door track to secure the doors.

Step 5: Adjust the doors

Once the doors are hung, you may need to adjust them so that they slide smoothly and evenly. To adjust the doors, follow these steps: 1. Loosen the screws on the door track. 2. Slide the doors back and forth until they are aligned properly. 3. Tighten the screws on the door track.