How To Hang A Full Length Mirror On Hollow Door

How to Hang a Full-Length Mirror on a Hollow Door

Hanging a full-length mirror on a hollow door is a practical solution for small spaces or renters who cannot drill into walls. Here's a step-by-step guide to help you hang your mirror securely and effortlessly: ### Gather Your Materials - Full-length mirror - Adhesive mirror mounting strips - Measuring tape or ruler - Pencil or marking tool - Level (optional) ### Measure and Mark the Position - Place the mirror on the door where you want it to hang. - Use a measuring tape to measure the distance from the top and bottom edges of the door to the edges of the mirror. - Mark the measurements lightly with a pencil. ### Clean the Surfaces - Remove any dust or debris from the back of the mirror and the surface of the door using a clean cloth. - Ensure the surfaces are dry before proceeding. ### Apply the Mounting Strips - Cut the adhesive mounting strips to fit the length of the mirror's edges. - Remove the protective backing from one side of the strips. - Carefully align the strips along the marked measurements on the back of the mirror and press firmly to secure them. ### Remove the Remaining Protective Backing - Remove the protective backing from the other side of the mounting strips. ### Align and Hang the Mirror - Lift the mirror carefully and align it with the markings on the door. - Press the mirror firmly onto the door, starting from the top edge. - Use a level to ensure the mirror is straight. ### Secure the Mirror - Hold the mirror in place for a few minutes to allow the adhesive to bond properly. - Use additional mounting strips at the bottom or side edges of the mirror for extra support if desired. ### Tips - Choose adhesive mounting strips that are specifically designed for mirrors or glass surfaces. - Make sure the mirror is not too heavy for the door to support. - If you are concerned about the mirror slipping, you can add a small piece of sticky tack or silicone gel beneath one corner. - To remove the mirror later, carefully peel the mounting strips off the surface, taking care not to damage the door or the mirror.