How To Replace Side Mirror Glass On Chevy Traverse

Understanding the essential aspects of replacing side mirror glass on a Chevy Traverse is crucial for maintaining a clear view while driving. This article will delve into the key steps involved, providing detailed instructions and highlighting important considerations.

Safety Precautions: Prioritize safety by parking the vehicle on a level surface, engaging the parking brake, and disconnecting the battery to prevent any electrical hazards.

Tools Required: Gather necessary tools such as a flathead screwdriver, trim removal tool, replacement mirror glass, and a clean cloth.

Removing the Mirror Cap: Use a flathead screwdriver to gently pry off the mirror cap by inserting it into the gap between the cap and the mirror housing.

Disconnecting the Wires: Carefully disconnect any wires connected to the mirror, including those for power, heating, and turn signals.

Removing the Mirror Assembly: Use a trim removal tool to carefully pry around the mirror assembly and detach it from the door panel. Support the assembly to prevent it from falling.

Detaching the Old Glass: Press down on the tabs holding the old glass in place and pull it towards you. If the tabs are difficult to release, use a flathead screwdriver to gently pry them open.

Installing the New Glass: Align the new glass with the mounting points and gently press it into place until it snaps securely. Ensure the glass is seated correctly and does not wobble.

Reassembling the Mirror Assembly: Carefully reattach the mirror assembly to the door panel by inserting it into its designated location and securing it with the mounting screws or bolts.

Reconnecting the Wires: Reconnect any wires that were previously disconnected, ensuring they are securely plugged in to restore power and functionality.

Reinstalling the Mirror Cap: Align the mirror cap with the housing and gently press it into place until it snaps back on. Check that the cap is securely attached and does not rattle.

Testing the Mirror: Reconnect the battery and start the vehicle to test the functionality of the replaced side mirror. Adjust the mirror as needed to ensure a clear and unobstructed view.