How To Put Trim Around A Bathroom Mirror

How to Put Trim Around a Bathroom Mirror

Adding trim around your bathroom mirror can enhance its appearance, make it a focal point of the room, and protect the mirror from damage. It's a relatively simple project that can be completed in a few hours with the right tools and materials. Here's a step-by-step guide to help you achieve a professional-looking finish:

Materials You'll Need:

Trim molding (e.g., wood, MDF, PVC)
Miter saw
Measuring tape
Pencil
Wood glue
Brad nails
Nail gun (optional)
Sandpaper or sanding sponge
Caulk gun
Paintable caulk

Instructions:

1. Measure and Cut the Trim:

Measure the length of each side of the mirror and add 1-2 inches for overlap at the corners. Use a miter saw to cut 45-degree angles on the ends of the trim pieces, ensuring that the angles on opposite sides of the mirror are mirror images.

2. Apply Wood Glue and Position the Trim:

Apply a thin bead of wood glue to the back of one of the trim pieces and place it against the edge of the mirror. Align the trim according to the measurements and press it firmly into place.

3. Secure the Trim with Nails:

Using a hammer or a nail gun, drive brad nails through the trim and into the mirror frame at an angle. Space the nails 6-8 inches apart for secure hold.

4. Repeat for Remaining Sides:

Follow the same process for the remaining sides of the mirror, ensuring that the mitered corners line up correctly.

5. Sand and Paint:

Once all the trim is installed, sand any rough edges or nail holes with sandpaper or a sanding sponge. If desired, apply a coat of paint or stain to match the trim to the bathroom decor.

6. Caulk the Edges:

Use a caulk gun to apply a thin bead of paintable caulk around the edges of the trim. Smooth the caulk with your finger or a caulk tool to create a watertight seal.

7. Let Dry and Enjoy:

Allow the caulk to dry completely before using the mirror. Your trimmed bathroom mirror is now ready to enhance the aesthetics and functionality of your bathroom.