How To Repair Damaged Mirror Glass

How to Repair Damaged Mirror Glass

A broken or damaged mirror can be an eyesore and a safety hazard. Luckily, it is possible to repair minor mirror damage at home with a few simple tools and materials.

Materials Needed:

Glass cleaner
Soft cloths
Clear epoxy
Masking tape
Razor blade or utility knife

Step 1: Clean the Mirror

Use glass cleaner and a soft cloth to clean the surface of the mirror, removing any dirt or debris. Pay special attention to the damaged area.

Step 2: Apply Masking Tape

Apply masking tape around the perimeter of the damaged area, leaving a small gap around the edges. This will help prevent the epoxy from spreading to unwanted areas.

Step 3: Apply Epoxy

Apply a small amount of clear epoxy to the damaged area using a toothpick or cotton swab. Use a little at a time and spread it evenly over the surface.

Step 4: Remove Excess Epoxy

Use a razor blade or utility knife to carefully remove any excess epoxy that has seeped out from under the masking tape. Hold the blade at a 45-degree angle and scrape gently.

Step 5: Let Dry

Allow the epoxy to cure and dry completely. The drying time will vary depending on the type of epoxy used. Refer to the manufacturer's instructions for specific details.