How To Hang Mirror With Command Strips

Hanging mirrors with command strips is a convenient and versatile method that offers a secure and damage-free installation. Understanding the essential aspects of this process ensures a successful and long-lasting result. These aspects encompass:

Selecting the appropriate command strips
Preparing the mirror and surface
Properly aligning and attaching the strips
Allowing sufficient curing time
Handling and maintaining the mirror

This article delves into each of these essential aspects, providing detailed instructions and tips to guide you through the process of hanging a mirror with command strips.

Part of Speech: Verb

The keyword "Hang" in "How To Hang Mirror With Command Strips" is a verb that denotes the action of attaching or suspending an object. Specifically, in this context, it refers to the process of securing a mirror using command strips.

Essential Aspects

Selecting the Appropriate Command Strips

Choosing the right command strips depends on the weight and size of the mirror. Heavier mirrors require stronger strips, while lightweight mirrors can be hung with standard strips. Ensure you select strips designed specifically for use with mirrors.

Preparing the Mirror and Surface

Clean both the mirror and the surface where it will be hung with a rubbing alcohol wipe. This removes any dirt or debris that may interfere with the adhesive bond. Allow both surfaces to dry thoroughly.

Properly Aligning and Attaching the Strips

Align the command strips on the back of the mirror. Press firmly for 30 seconds to ensure a secure attachment. Then, remove the protective liner from the other side of the strips and align them with the desired hanging location on the wall or surface.

Allowing Sufficient Curing Time

After attaching the command strips, allow at least 1 hour for the adhesive to fully cure. This ensures a strong and lasting hold.

Handling and Maintaining the Mirror

Handle the mirror carefully when lifting or moving it. To maintain the bond, avoid exposing the command strips to excessive heat or moisture. If needed, you can remove the command strips by gently pulling them straight down.