How To Remove Large Bathroom Mirror With Clips

How to Remove a Large Bathroom Mirror With Clips

Removing a large bathroom mirror with clips may seem like a daunting task, but it is actually quite simple. With the right tools and a little bit of care, you can safely remove your mirror without damaging it or your bathroom wall.

Materials You'll Need:

Plastic putty knife or credit card
Flathead screwdriver
Cloth or towel

Step-by-Step Instructions:

1. Remove Clips:

Use the plastic putty knife or credit card to gently pry underneath the clips holding the mirror to the wall. Be careful not to scratch the mirror or the wall.

2. Loosen Screws:

Once you have loosened the clips, use the flathead screwdriver to loosen the screws that hold the mirror to the wall.

3. Tilt Mirror:

Tilt the mirror slightly away from the wall, supporting it with one hand to prevent it from falling.

4. Remove Mirror:

Carefully lift the mirror up and off of the wall while supporting it with your other hand.

5. Place Mirror on Cloth:

Place the mirror face down on a cloth or towel to protect it from scratches.

Tips:

If you are having difficulty prying the clips loose, you can use a small amount of WD-40 to loosen them up.
If the mirror is very large or heavy, ask a friend or family member to help you lift it.
Be careful not to overtighten the screws when reattaching the mirror to the wall.

Conclusion:

Removing a large bathroom mirror with clips is a simple task that can be completed in just a few minutes. By following the steps outlined above, you can safely remove your mirror without damaging it or your bathroom wall.