How To Frame Bathroom Mirror With Molding

How to Frame a Bathroom Mirror with Molding

A framed bathroom mirror can add a touch of elegance and sophistication to any bathroom. It's a relatively easy project that can be completed in a few hours with the right tools and materials. Here's a step-by-step guide on how to frame a bathroom mirror with molding:

Materials:

Mirror
Molding
Miter saw
Brad nailer
Measuring tape
Level
Wood filler
Sandpaper
Paint or stain (optional)

Steps:

Measure the mirror. Use a measuring tape to determine the length and width of the mirror.
Cut the molding. Measure and cut four pieces of molding to the length of the mirror. Use a miter saw to cut the corners at 45-degree angles.
Assemble the frame. Dry-fit the molding pieces around the mirror, making sure the corners fit together snugly. Adjust the cuts if necessary.
Nail the frame. Use a brad nailer to attach the molding to the mirror. Start by nailing the top piece, then the sides and finally the bottom.
Fill the nail holes. Use wood filler to fill the nail holes. Allow the filler to dry, then sand it smooth.
Paint or stain the frame (optional). If desired, you can paint or stain the frame to match the bathroom decor. Allow the paint or stain to dry completely.
Hang the mirror. Use mirror clips or D-rings to hang the mirror on the wall.

Tips:

Use a sharp blade when cutting the molding to ensure clean cuts.
Test the fit of the molding before nailing it in place.
Use a level to make sure the frame is hung straight.
Be patient and take your time. Framing a mirror with molding is a simple project, but it requires precision.