Can I Replace A Wing Mirror Myself

Can I Replace A Wing Mirror Myself?

Replacing a wing mirror is a relatively simple task that can be completed in under an hour with the right tools and a little bit of know-how. In this article, we'll walk you through the step-by-step process of replacing a wing mirror, so you can save yourself time and money. Here's what you'll need to get started:

Tools and Materials

New wing mirror
Screwdriver
Socket wrench
Electrical tape

Step-by-Step Instructions

1. Remove the Old Mirror

Start by removing the old wing mirror. To do this, locate the two or three screws that hold the mirror in place. These screws are usually located at the base of the mirror, behind the plastic cover. Once you've found the screws, remove them using a screwdriver.

2. Disconnect the Electrical Connector

Once the screws are removed, you'll need to disconnect the electrical connector. The connector is usually located behind the plastic cover. Simply press on the release tab and pull the connector apart.

3. Remove the Plastic Cover

With the electrical connector disconnected, you can now remove the plastic cover. The cover is usually held in place by a few clips. Simply pry the clips loose using a flat-head screwdriver or a trim removal tool.

4. Remove the Mirror

Once the plastic cover is removed, you'll be able to see the mirror. The mirror is usually held in place by one or two bolts. Remove these bolts using a socket wrench.

5. Install the New Mirror

Now that the old mirror is removed, you can install the new one. To do this, simply reverse the steps you took to remove the old mirror. First, insert the bolts into the mirror and tighten them using a socket wrench. Then, attach the electrical connector and replace the plastic cover.

6. Test the Mirror

Once the mirror is installed, test it to make sure it's working properly. Adjust the mirror to the desired position and angle. Then, start the engine and check the mirror to make sure it's providing a clear view.

Tips

Before you start, make sure you have all the necessary tools and materials.
If you're not comfortable working with electrical components, it's best to have a qualified mechanic replace the mirror for you.
If the new mirror doesn't fit properly, don't force it. Check to make sure the part number matches the old mirror and try again.
If you have any questions or concerns, don't hesitate to consult a qualified mechanic.

Conclusion

Replacing a wing mirror is a relatively simple task that can be completed in under an hour. By following the steps outlined in this article, you can save yourself time and money. Just remember to take your time and be careful, and you'll be back on the road in no time.