How To Change Bulb In Conair Mirror

Changing the bulb in a Conair mirror is a simple task that can be completed in a few minutes. By following these simple steps, you can ensure that your mirror is always well-lit and functioning properly.

Materials You'll Need

Replacement bulb (the correct type and wattage for your mirror)
Phillips head screwdriver

Step-by-Step Instructions

Unplug the mirror from the electrical outlet.
Locate the screws that hold the back of the mirror in place. There are typically two screws located at the bottom of the mirror.
Remove the screws and carefully lift the back of the mirror off.
Locate the bulb socket. It is typically located in the center of the back of the mirror.
Unscrew the old bulb from the socket and discard it.
Screw the new bulb into the socket.
Replace the back of the mirror and tighten the screws.
Plug the mirror back into the electrical outlet.

Tips

Be sure to use the correct type and wattage of bulb for your mirror. Using the wrong type of bulb can damage the mirror or cause it to overheat.
If you are having difficulty removing the back of the mirror, you can try using a thin putty knife or a credit card to pry it off.
Be careful not to overtighten the screws when replacing the back of the mirror.