How To Fix Side Mirror On Car With Tape

How to Fix a Side Mirror on a Car with Tape

A damaged side mirror can be a major inconvenience, especially if you're driving in traffic. Luckily, it's relatively easy to fix a side mirror using tape. In this article, we'll show you how to do it step-by-step.

Materials you'll need:

Duct tape
Clean cloth
Rubbing alcohol
Utility knife

Step-by-step instructions:

1. Clean the surfaces: Remove all debris and dirt from the mirror and the mounting surface. Use a clean cloth and rubbing alcohol to clean the surfaces thoroughly.

2. Apply the tape: Tear off a piece of duct tape that is long enough to wrap around the mirror and the mounting surface. Apply the tape to the mirror, making sure to smooth out any wrinkles or bubbles.

3. Wrap the tape around the mounting surface: Wrap the tape around the mounting surface, pulling it tightly. Overlap the tape by at least 1 inch for extra strength.

4. Trim the excess tape: Use a utility knife to trim any excess tape. Be careful not to cut the tape that is holding the mirror in place.

5. Test the mirror: Check that the mirror is securely attached and that it moves smoothly. If necessary, adjust the position of the mirror or apply more tape for reinforcement.

Tips for a successful repair:

Use high-quality duct tape for best results.
Make sure the surfaces are clean and dry before applying the tape.
Wrap the tape tightly and overlap it sufficiently.
Allow the tape to dry completely before driving the car.

By following these steps, you can easily fix a broken side mirror using tape. This is a quick and inexpensive solution that will get you back on the road safely.