How To Frame A Mirror With Pallet Wood

How to Frame a Mirror with Pallet Wood

Framing a mirror with pallet wood is a relatively simple and inexpensive way to add a rustic touch to your home décor. By following a few simple steps, you can create a beautiful and unique mirror that will complement any décor.

Before you begin, you will need to gather the following materials:

A mirror
Pallet wood
Wood glue
Nails or screws
A hammer or drill
A level
A measuring tape

Once you have gathered your materials, you can begin framing your mirror. The first step is to measure the mirror and cut the pallet wood to size. The wood should be cut to the same length as the mirror, and it should be wide enough to cover the edges of the mirror by about 1 inch.

Once the wood is cut to size, you can begin gluing it to the mirror. Apply a generous amount of wood glue to the back of the wood, and then press it firmly against the mirror. Use a level to make sure that the wood is straight, and then allow the glue to dry completely.

Once the glue has dried, you can nail or screw the wood to the mirror. Use a hammer or drill to drive the nails or screws through the wood and into the mirror. Be sure to countersink the nails or screws so that they are flush with the surface of the wood.

Once the wood is nailed or screwed to the mirror, your framed mirror is complete. You can now hang it on the wall and enjoy its rustic beauty.