How To Frame A Wall Mirror With Molding

By admin | February 13, 2021

How to Frame a Wall Mirror with Molding

Adding a frame to a wall mirror is a great way to add style and personality to your home. It's a relatively simple project that can be completed in a few hours. Here are the steps on how to frame a wall mirror with molding:

Materials You'll Need:

  • Wall mirror
  • Picture frame molding
  • Miter saw
  • Measuring tape
  • Pencil
  • Wood glue
  • Clamps
  • Finishing nails
  • Hammer

Instructions:

  1. Measure and cut the molding. Measure the outside edge of the mirror and cut four pieces of molding to that length using a miter saw. Be sure to cut the corners at a 45-degree angle so that they fit together nicely.
  2. Apply wood glue to the corners of the molding. Spread a thin layer of wood glue to the inside edges of the molding where the corners will meet. Press the corners together and hold them in place with clamps.
  3. Wipe away any excess glue. Use a damp cloth to wipe away any excess glue that squeezes out from the corners. This will help prevent the glue from showing once the frame is finished.
  4. Allow the glue to dry completely. Allow the frame to sit for several hours or overnight until the glue has dried completely. This will ensure that the frame is strong and secure.
  5. Attach the frame to the mirror. Place the frame around the mirror and center it. Use finishing nails to attach the frame to the mirror, spacing the nails about 6 inches apart. Hammer the nails in until they are flush with the surface of the frame.
  6. Hang the mirror on the wall. Use a picture hanger or wire to hang the mirror on the wall. Be sure to hang the mirror securely so that it does not fall.

Tips:

  • Use a high-quality wood glue that is specifically designed for gluing wood. This will ensure that the frame is strong and durable.
  • If you are not comfortable using a miter saw, you can purchase pre-cut molding from a home improvement store.
  • Be sure to measure the mirror carefully before cutting the molding. You want the frame to fit snugly around the mirror.
  • If the frame is too loose, you can add shims to the corners to tighten it up.
  • You can paint or stain the frame to match the decor of your home.


Framing A Bathroom Mirror Tempting Thyme

Framing A Bathroom Mirror Tempting Thyme

How To Frame A Mirror With Clips In 5

How To Frame A Mirror With Clips In 5 Easy Steps

Diy Bathroom Mirror Upgrade Tutorial

Diy Bathroom Mirror Upgrade Tutorial Use Mdf Trim And Crown Molding To Build A Frame Around The Home Decor Remodeling

How To Frame A Bathroom Mirror

How To Frame A Bathroom Mirror Nest For Less

How To Frame A Mirror

How To Frame A Mirror

Bathroom Mirror Over Plastic Clips

How To Frame A Bathroom Mirror Over Plastic Clips Somewhat Simple

Crafty Again

Crafty Again

How To Frame A Bathroom Mirror

How To Frame A Bathroom Mirror Nest For Less

Adding Wood Trim To Our Vanity Mirror

Adding Wood Trim To Our Vanity Mirror 10 Diy Growit Buildit

Diy Mirror Frame Remodelaholic

Diy Mirror Frame Remodelaholic


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.