How To Frame An Existing Mirror In A Bathroom

How to Frame An Existing Mirror in a Bathroom

Adding a frame to an existing mirror in your bathroom can instantly elevate the look and feel of the space. It's a relatively simple and budget-friendly DIY project that can be completed in a few hours. Here's a step-by-step guide on how to frame an existing mirror in a bathroom:

Materials you'll need:

Picture frame that fits the size of your mirror
Wood filler
Putty knife
Sandpaper
Caulk gun
Caulk
Measuring tape
Pencil
Hammer
Nails

Step 1: Measure and mark the frame

Measure the height and width of the mirror. Mark these measurements onto the back of the picture frame using a pencil. Use a ruler or straight edge to ensure your lines are straight.

Step 2: Cut the frame

Using a miter saw or a handsaw, cut the frame to the marked measurements. Make sure the cuts are clean and precise. If you're using a handsaw, use a miter box to help you cut the angles.

Step 3: Assemble the frame

Apply wood filler to the mitered corners of the frame. Use a putty knife to smooth out the filler. Allow the filler to dry completely.

Step 4: Sand the frame

Once the wood filler is dry, use sandpaper to sand the frame smooth. Start with a coarse sandpaper and gradually move to a finer sandpaper. Sanding will help to remove any imperfections and create a smooth surface for painting or staining.

Step 5: Paint or stain the frame

If desired, paint or stain the frame to match the decor of your bathroom. Allow the paint or stain to dry completely before proceeding to the next step.

Step 6: Apply caulk

Apply a bead of caulk around the edges of the mirror. This will help to seal the frame to the mirror and prevent moisture from getting in.

Step 7: Place the frame

Carefully place the frame over the mirror. Align the frame with the marks you made earlier. Press the frame firmly against the mirror to adhere it to the caulk.

Step 8: Secure the frame

Hammer nails through the holes in the back of the frame into the mirror. This will help to secure the frame in place.

Step 9: Trim excess caulk

Once the frame is secure, use a utility knife to trim any excess caulk around the edges. This will give your frame a clean and finished look.

And there you have it! With just a few simple steps, you've successfully framed an existing mirror in your bathroom. This easy DIY project is a great way to give your bathroom a fresh and updated look without breaking the bank.