How To Hang A Big Framed Mirror

Hanging a big framed mirror is a relatively straightforward task, but it's important to do it properly to avoid damaging the mirror or your walls. Here are the essential aspects to consider:

## Essential Aspects ### Materials

You will need the following materials:

- Large, framed mirror - Measuring tape - Pencil - Level - Hammer - Nails or screws - Drywall anchors (if necessary) ### Preparation

Before you start hanging the mirror, make sure you have a clear and level surface to work on. If you're hanging the mirror on a drywall wall, you may need to use drywall anchors to provide extra support.

### Measuring and Marking

Use the measuring tape and pencil to measure and mark the location of the mirror on the wall. Use the level to make sure the marks are level. If you're using drywall anchors, drill pilot holes for the anchors at the marked locations.

### Hanging the Mirror

If you're using nails or screws, carefully hammer them into the wall at the marked locations. If you're using drywall anchors, insert the anchors into the pilot holes and then screw the nails or screws into the anchors.

### Centering the Mirror

Once the mirror is hanging, use the level to make sure it's centered. Adjust the nails or screws as needed until the mirror is level.

### Finishing

Once the mirror is level and centered, you can remove the measuring tape and pencil marks. If you're happy with the result, you're all done!