How To Hang Beveled Edge Mirror

How to Hang a Beveled Edge Mirror

Hanging a beveled edge mirror is a relatively easy task that can be completed in a few simple steps. By following these instructions, you can ensure that your mirror is hung securely and looks its best.

Materials you will need:

Beveled edge mirror
Mirror hanging kit
Level
Pencil
Hammer
Measuring tape

Instructions:

1. Determine the location of the mirror:

Use a measuring tape and level to mark the location of the mirror on the wall. Make sure that the mirror is centered and level. If you are hanging the mirror above a vanity or sink, measure the distance from the top of the vanity or sink to the bottom of the mirror. This will help you determine the height at which to hang the mirror.

2. Install the mirror hanging kit:

Follow the instructions included with the mirror hanging kit to install the mounting brackets on the back of the mirror. Make sure that the brackets are securely attached. Some mirror hanging kits may require you to use a screwdriver to tighten the screws. Once the brackets are installed, hang the mirror on the wall by sliding the brackets onto the D-rings.

3. Use a level to make sure the mirror is level:

Once the mirror is hanging on the wall, use a level to make sure that it is level. If the mirror is not level, adjust the mounting brackets until it is. You may need to use a hammer to gently tap the brackets into place.

4. Secure the mirror to the wall:

Once the mirror is level, use a pencil to mark the location of the mounting holes on the wall. Remove the mirror from the wall and drill pilot holes at the marked locations. Insert the screws into the pilot holes and tighten them until the mirror is securely attached to the wall.

5. Enjoy your newly hung beveled edge mirror:

Step back and admire your newly hung beveled edge mirror. You can now enjoy the beauty and functionality of your new mirror for years to come.