How To Make A Frame For A Large Mirror

How to Make a Frame for a Large Mirror

A large mirror can be a beautiful and functional addition to any room. However, finding a frame that is both stylish and affordable can be a challenge. If you're handy and have a little time on your hands, you can make your own frame for a fraction of the cost. Here's how to do it:

Materials you'll need:

Picture frame molding of your choice
Miter saw or miter box
Wood glue
Clamps
Brad nailer or hammer and nails
Sandpaper or sanding block
Wood filler
Paint or stain (optional)

Instructions:

Measure the mirror and determine how wide you want the frame to be. Cut four pieces of molding to the desired length using a miter saw or miter box.
Apply wood glue to the mitered edges of the molding and clamp the pieces together. Wipe away any excess glue that squeezes out.
Reinforce the corners with brad nails or hammer and nails. Countersink the nails slightly below the surface of the wood.
Sand the frame lightly to smooth any rough edges or splinters. Fill any nail holes or gaps with wood filler.
Paint or stain the frame as desired. Allow the finish to dry completely.
Attach the mirror to the frame using mirror clips or adhesive strips. Be sure to center the mirror and press firmly around the edges to secure it.

Tips:

Choose a molding that is wide enough to cover the mirror's edges by at least 1/2 inch.
If you don't have a miter saw, you can rent one from a home improvement store.
Be careful not to apply too much wood glue, as it can bleed out and ruin the finish.
Allow the wood glue to dry completely before painting or staining the frame.
If you're using a heavy mirror, be sure to use strong mirror clips or adhesive strips to attach it to the frame.

With a little planning and effort, you can create a beautiful and affordable frame for your large mirror. This project is a great way to add a personal touch to your home and save money at the same time.