How To Make Sunburst Wall Mirror

How to Craft a Sunburst Wall Mirror: A Step-by-Step Guide

A sunburst mirror adds a touch of radiance and elegance to any room. Here's a comprehensive guide to help you create your own stunning sunburst wall mirror:

Materials You'll Need:

Round mirror
Wood slats (approx. 1" x 6", length varies)
Mitre saw or mitre box
Wood glue
Clamps
Wood filler
Sandpaper
Paint or stain (optional)

Step 1: Cut the Wood Slats

Measure the desired length of the wood slats. Use a mitre saw or a mitre box to cut 45-degree angles on both ends of each slat. The number of slats you need will depend on the size of the mirror.

Step 2: Assemble the Sunburst Base

Apply wood glue to the 45-degree angles of two wood slats. Align the slats at a 90-degree angle and clamp them together. Repeat this process to form 4 pairs of slats. Let the glue dry completely.

Step 3: Attach the Sunburst Base to the Mirror

Apply wood glue to the back of one of the sunburst base pairs. Place it on the back of the mirror, aligning the angles with the mirror's edge. Clamp it in place and let the glue dry.

Step 4: Build the Upper Layers

Repeat step 2 to create 2 more sunburst base pairs, each slightly smaller than the previous one. Attach these layers to the mirror, offset from the previous layer, using wood glue and clamps.

Step 5: Fill and Sand Joints

Fill any gaps or imperfections in the joints with wood filler. Let it dry and sand the surface smooth to create a seamless finish.

Step 6: Finish and Display

If desired, paint or stain the sunburst mirror to match your decor. Allow the finish to dry completely. Hang the mirror on the wall using appropriate hardware. Enjoy your stunning handmade creation that will illuminate any room.