How To Put Molding Around Bathroom Mirror

How to Put Molding Around a Bathroom Mirror

Adding molding around a bathroom mirror is a great way to add a touch of elegance and sophistication to your bathroom. It is also a relatively easy and inexpensive project that can be completed in a few hours. Here are the steps on how to put molding around a bathroom mirror:

Materials You'll Need

Molding of your choice

Miter saw

Caulk gun

Caulk

Tape measure

Level

Hammer or nail gun

Nails or brads

Step 1: Measure and Cut the Molding

The first step is to measure and cut the molding to the desired length. To do this, measure the perimeter of the mirror and add 2 inches for the mitered corners. Cut the molding to this length using a miter saw.

Step 2: Miter the Corners

Once the molding is cut to length, you will need to miter the corners. To do this, place the molding on the miter saw and adjust the blade to a 45-degree angle. Make sure that the blade is facing the right direction for the corner that you are cutting. Cut the molding at a 45-degree angle, and then repeat for the other side of the corner.

Step 3: Attach the Molding to the Mirror

Once the corners are mitered, you can attach the molding to the mirror. To do this, apply a bead of caulk to the back of the molding and press it into place around the mirror. Use a level to make sure that the molding is level, and then hammer or nail it into place. You can use either nails or brads, but brads are less likely to split the molding.

Step 4: Caulk the Joints

Once the molding is attached, you will need to caulk the joints between the molding and the mirror. To do this, apply a bead of caulk to the joint and smooth it out with your finger. Make sure that the caulk is completely dry before using the mirror.

Putting molding around a bathroom mirror is a simple and inexpensive way to add a touch of elegance and sophistication to your bathroom. By following these steps, you can easily complete this project in a few hours.