How To Put Sliding Mirror Closet Door Back On Track

How to Put a Sliding Mirror Closet Door Back on Track

Sliding mirror closet doors are a convenient and stylish way to access your wardrobe. However, if the doors come off the track, it can be a frustrating experience. Fortunately, putting them back on track is a relatively simple process that can be completed in a few steps. ### Gather Your Tools Before you begin, gather the following tools: - A step stool or ladder - A screwdriver - A putty knife or thin pry bar - A measuring tape - A pencil ### Step 1: Check the Track First, inspect the track for any damage or debris. If there is any damage, you will need to repair it before you can put the door back on. You can use a hammer and nail to bend the track back into place or replace it entirely if it is too damaged. ### Step 2: Measure the Door Use the measuring tape to measure the height of the door. This will help you determine where to place the rollers on the track. ### Step 3: Remove the Trim Using the screwdriver, remove the trim pieces from the top and bottom of the door. Be careful not to damage the trim or the door. ### Step 4: Remove the Rollers Once the trim is removed, you will see the rollers attached to the door. Use the putty knife or pry bar to gently pry the rollers off the track. ### Step 5: Clean the Rollers Use a cloth to clean the rollers and remove any dirt or debris. This will help them move smoothly on the track. ### Step 6: Lubricate the Track Apply a small amount of lubricant to the track. This will help the rollers glide easily. ### Step 7: Replace the Rollers Place the rollers back on the track. Make sure that they are aligned with the holes in the door. ### Step 8: Reattach the Trim Replace the trim pieces to the top and bottom of the door. Make sure that they are securely attached. ### Step 9: Test the Door Open and close the door a few times to make sure that it is working properly. If the door is still not sliding smoothly, you may need to adjust the rollers. ### Tips - If the door is too heavy, you may need to adjust the tension on the rollers. - If the door is not aligned properly, you may need to adjust the track. - If you are having trouble putting the door back on track, you can contact a professional for assistance.