How To Replace Broken Mirror Glass

How to Replace Broken Mirror Glass

Mirrors can break for various reasons, leaving you with a less than desirable reflection. Replacing broken mirror glass is not a difficult task, and it can save you the cost of purchasing a new mirror. Here is a step-by-step guide on how to replace broken mirror glass:

Safety First: Before you begin, it is important to take safety precautions. Wear gloves to protect your hands from sharp shards of glass. If the mirror is large or heavy, ask for assistance from a friend or family member.

Gather Your Materials: To replace the mirror glass, you will need the following materials:

New mirror glass cut to the size of the broken glass
Mirror mastic or adhesive
Putty knife or similar tool
Gloves
Safety glasses (optional)

Remove the Broken Glass: Carefully remove the broken glass shards using gloves. If any small pieces remain, use a putty knife to gently scrape them off.

Clean the Frame: Once the glass is removed, clean the frame of the mirror thoroughly using a damp cloth. This will ensure that the new glass adheres properly.

Apply Mirror Mastic or Adhesive: Apply a thin, even layer of mirror mastic or adhesive to the back of the new glass. Make sure to spread it evenly over the entire surface.

Set the Glass in Place: Carefully set the new glass into the frame. Press down firmly and evenly to ensure that it is secure and level.

Secure the Glass: Use mirror clips or small nails to secure the glass in place. This will prevent it from shifting or falling out.

Allow the Adhesive to Dry: Give the adhesive time to dry completely before using the mirror. The drying time will vary depending on the type of adhesive used.

Congratulations! You have successfully replaced the broken mirror glass. Now you can enjoy a clear and undistorted reflection.