How To Replace Bulb In Conair Lighted Makeup Mirror

How to Replace Bulb in Conair Lighted Makeup Mirror

Replacing the bulb in a Conair lighted makeup mirror is a simple task that can be completed in a few minutes. By following these step-by-step instructions, you can ensure that your mirror is always providing you with the best possible lighting.

Materials You'll Need

Replacement bulb (compatible with your mirror model)
Phillips head screwdriver or coin

Step-by-Step Instructions

1. Turn off the mirror.

This is a safety precaution to prevent electrical shock.

2. Locate the bulb cover.

The bulb cover is usually located on the back of the mirror. It may be held in place by screws or clips.

3. Remove the bulb cover.

If the bulb cover is held in place by screws, use a screwdriver to remove them. If the bulb cover is held in place by clips, gently pry them open.

4. Remove the old bulb.

Gently grasp the old bulb and pull it straight out of the socket.

5. Insert the new bulb.

Align the new bulb with the socket and gently push it in until it is secure.

6. Replace the bulb cover.

If the bulb cover was held in place by screws, use a screwdriver to replace them. If the bulb cover was held in place by clips, gently snap them closed.

7. Turn on the mirror.

Make sure that the bulb is working properly by turning on the mirror.

Tips

Use a replacement bulb that is compatible with your mirror model. Using an incorrect bulb could damage the mirror.
If you are having difficulty removing the bulb cover, try using a coin or other flat object to pry it open.
If you are replacing the bulb in a mirror that is mounted on the wall, be sure to unplug the mirror before beginning.