How To Replace Sliding Mirror Closet Doors

How to Replace Sliding Mirror Closet Doors

Replacing sliding mirror closet doors may seem like a daunting task, but it's a project that can be completed in a few hours with the right tools and a little bit of know-how. Here are the essential steps involved in replacing sliding mirror closet doors:

1. Remove the Old Doors:

Begin by removing the trim pieces that secure the doors to the track.
Lift the doors slightly and tilt them towards you to disengage them from the track.
Carefully lift the doors off the track and set them aside.

2. Prepare the Track:

Clean the track with a damp cloth to remove any dust or debris.
Inspect the track for any damage or obstructions.
If necessary, lubricate the track with a silicone-based lubricant.

3. Install the New Doors:

Lift the new doors and place them on the track.
Tilt the doors slightly away from you to engage them with the track.
Lower the doors and secure them with the trim pieces.

4. Adjust the Doors:

Check that the doors are level and aligned properly.
Adjust the height of the doors by turning the adjustment screws located at the bottom of the doors.
Adjust the side-to-side position of the doors by moving the track brackets.

5. Install the Trim and Hardware:

Attach the trim pieces around the doors to secure them and provide a finished look.
Install any handles or knobs on the doors for easy opening.
Check that the doors operate smoothly and close securely.

Tips:

Measure the opening carefully before ordering new doors. Doors should fit snugly within the track.
Use a level to ensure that the doors are installed straight.
Wear gloves to protect your hands from sharp edges.
If you encounter any difficulties, do not hesitate to consult a professional handyman or carpenter.