How To Respray A Car Wing Mirror

How To Respray A Car Wing Mirror: A Comprehensive Guide

Respraying a car wing mirror is a relatively simple task that can be completed in a few hours. However, it is important to take your time and follow the instructions carefully to ensure a professional-looking finish. Here are the essential steps on how to respray a car wing mirror:

Materials you'll need:

Sandpaper (120-grit, 220-grit, and 400-grit)
Primer
Base coat
Clear coat
Masking tape
Newspaper or plastic sheeting
Safety glasses
Dust mask
Spray gun
Air compressor

Step 1: Preparation

Start by removing the wing mirror from the car. This is usually done by removing a few bolts or screws. Once the wing mirror is removed, clean it thoroughly with soap and water to remove any dirt or grease.

Step 2: Sanding

Once the wing mirror is clean, start sanding it with 120-grit sandpaper. This will help to remove any rust or old paint. Once you have sanded the wing mirror with 120-grit sandpaper, switch to 220-grit sandpaper and then 400-grit sandpaper. This will help to smooth out the surface of the wing mirror.

Step 3: Priming

Once the wing mirror is sanded, it is time to apply primer. Primer helps to protect the metal of the wing mirror from rust and corrosion. It also helps to create a smooth surface for the paint to adhere to. Apply two or three thin coats of primer to the wing mirror, allowing each coat to dry completely before applying the next.

Step 4: Base coat

Once the primer is dry, it is time to apply the base coat. The base coat is the color of the paint that you want the wing mirror to be. Apply two or three thin coats of base coat to the wing mirror, allowing each coat to dry completely before applying the next.

Step 5: Clear coat

Once the base coat is dry, it is time to apply the clear coat. The clear coat helps to protect the base coat from scratches and UV damage. Apply two or three thin coats of clear coat to the wing mirror, allowing each coat to dry completely before applying the next.

Step 6: Reassembly

Once the clear coat is dry, you can reassemble the wing mirror. Start by attaching the mirror to the backing plate. Then, attach the backing plate to the car. Tighten all of the bolts and screws securely.