How To Stick A Car Wing Mirror Back On

How to Put a Car Wing Mirror Back On

In most cases, repairing a broken or loose wing mirror on your car is a simple and inexpensive DIY task that can be completed in a matter of minutes. Wing mirrors, also known as side mirrors, are essential safety features that allow drivers to see behind and beside their vehicles, enabling them to change lanes, reverse, and park safely. If your wing mirror has become damaged or dislodged, it is important to repair or replace it promptly to ensure optimal visibility and driving safety.

Before starting, gather the necessary tools and materials. You will need a screwdriver, a clean cloth, and possibly some adhesive or epoxy. The specific tools and materials required may vary depending on the type of wing mirror and the extent of the damage.

Steps to Reattach a Broken Wing Mirror:

1. Remove the Broken Mirror: Carefully remove the broken glass mirror from the housing. Wear gloves to protect your hands from any sharp edges. Clean the housing thoroughly with a damp cloth to remove any dirt or debris.

2. Apply Adhesive or Epoxy: If the mirror is not broken into small pieces, you may be able to reattach it using adhesive or epoxy. Apply a thin layer of adhesive or epoxy to the back of the mirror and carefully align it with the housing. Press the mirror firmly into place and hold it for a few minutes to allow the adhesive to set.

3. Reassemble the Housing: Once the mirror is reattached, reassemble the housing and secure it with screws or bolts. Tighten the screws or bolts securely, but do not overtighten as this could damage the housing.

4. Adjust the Mirror: After reattaching the mirror, adjust it to provide optimal visibility. The ideal position for the mirror is one that allows you to see clearly behind and beside your vehicle without having to turn your head excessively.

Tips for Replacing a Wing Mirror:

In some cases, the wing mirror assembly may be too damaged to repair and will need to be replaced. Here are some tips for replacing a wing mirror:

1. Purchase the Correct Replacement: Ensure you purchase a replacement wing mirror that is compatible with your vehicle make and model. This information can be found in your vehicle's owner's manual or by consulting with a mechanic.

2. Disconnect the Electrical Connector: Before removing the old wing mirror, disconnect the electrical connector that powers the mirror's adjustments and heating functions.

3. Remove the Mounting Screws: Locate the mounting screws that secure the wing mirror to the vehicle's door or fender. Remove these screws carefully to avoid damaging the paint or bodywork.

4. Install the New Mirror: Align the new wing mirror with the mounting points and secure it with the mounting screws. Reconnect the electrical connector and adjust the mirror for optimal visibility.