Installing Bathroom Mirror Clips

How to Install Bathroom Mirror Clips

Installing bathroom mirror clips is a relatively simple task that can be completed in a few minutes. However, it is important to ensure that the clips are installed correctly in order to prevent the mirror from falling and breaking.

Materials and Tools

Bathroom mirror
Mirror clips (2)
Screws (4)
Drill
Screwdriver
Level
Pencil or marker

Instructions

Determine the placement of the clips. Hold the mirror against the wall where you want to install it. Use the clips to mark the location of the drill holes.
Drill the holes. Use the drill to create two holes at the marked locations. The holes should be deep enough to accommodate the screws.
Insert the screws. Insert the screws into the holes and turn them until they are snug.
Attach the clips to the screws. Hook the mirror clips onto the screws.
Hang the mirror. Carefully lift the mirror and place the top edge on the clips. Push down on the bottom edge of the mirror until it is secure.

Tips

Use a level to ensure that the mirror is hanging straight.
If the wall is not perfectly smooth, you may need to use shims to level the mirror.
Do not overtighten the screws, as this could damage the mirror.

Safety Precautions

Always wear safety glasses when using power tools.
Be careful not to drill into any electrical wires or plumbing pipes.
If you are not comfortable installing the mirror yourself, consult a professional.