Pottery Barn Kensington Mirror Installation Instructions

Installing a mirror can be a daunting task, but with the right instructions, it can be a breeze. Pottery Barn's Kensington Mirror is a beautiful and elegant addition to any home, and with these step-by-step instructions, you can install it like a pro.

Tools and Materials You'll Need:

Kensington Mirror
Level
Drill
Screwdriver
Anchors
Screws

Step 1: Determine the Placement

Before you begin installing the mirror, you need to determine where you want it to go. Use the level to mark the top and bottom center points of the mirror on the wall.

Step 2: Drill the Holes

Once you have marked the placement, it's time to drill the holes for the anchors. Use the drill to create four holes, two at the top and two at the bottom, along the marks you made in Step 1. Make sure the holes are deep enough to accommodate the anchors.

Step 3: Insert the Anchors

Take the anchors and insert them into the holes. Tap them in gently with a hammer until they are flush with the wall.

Step 4: Attach the Screws

Screw the screws into the anchors. Leave about 1/4 inch of the screw exposed.

Step 5: Hang the Mirror

Carefully lift the mirror and align it with the screws. Slide the mirror down onto the screws until it is securely in place.

Step 6: Check the Level

Once the mirror is hung, use the level to check that it is level. If it is not, adjust the screws accordingly.

Tips:

If you are installing the mirror on a plaster wall, you may need to use toggle bolts instead of anchors.
Be sure to use the appropriate size anchors and screws for the weight of the mirror.
If you have any doubts about your ability to install the mirror safely, it is best to consult a professional.

With a little care and attention, you can install your Pottery Barn Kensington Mirror quickly and easily. Enjoy the beauty and elegance of this timeless piece for years to come!