Remove Mirror From Wall Clips

Mirrors not only add beauty to your home but also reflect light and make your space look larger and brighter. However, if you ever find yourself needing to remove a mirror from wall clips, it might seem like a daunting task. This guide will take you through the steps on how to safely remove a mirror from wall clips without damaging the mirror or the wall.

Prepare the Area

Before you start, clear the area around the mirror and lay down a drop cloth or old towels to protect your floor from any falling glass or debris. Wear safety goggles to protect your eyes from any flying shards.

Locate the Clips

Most mirrors are held in place by clips or brackets that are attached to the wall. Carefully inspect the edges of the mirror to locate these clips. They are usually small, metal clips that are screwed into the wall and hold the mirror in place.

Loosen the Clips

Using a screwdriver or drill, carefully loosen the screws that hold the clips in place. Do not remove the screws completely at this point, as you still need to support the mirror.

Support the Mirror

Once the screws are loose, carefully lift the mirror slightly from the bottom to relieve pressure on the clips. Hold the mirror in place with one hand while you continue to loosen the screws with the other.

Remove the Mirror

Once the clips are completely loose, carefully lift the mirror straight up and away from the wall. Do not tilt the mirror, as this could cause it to break. If the mirror is particularly heavy, enlist the help of a friend or family member to assist you.

Clean Up

Once the mirror is removed, remove the clips from the wall. Use a damp cloth to clean any dirt or debris from the wall and the clips. If necessary, you can patch any holes in the wall where the clips were attached.