Sliding Mirror Door Track Replacement

Sliding Mirror Door Track Replacement: A Comprehensive Guide

Sliding mirror doors are a popular choice for closets and other areas of the home due to their space-saving design. However, over time, the tracks that the doors slide along can become worn or damaged, making it difficult to open and close the doors smoothly. If you're facing this issue, replacing the sliding mirror door track is a relatively simple and cost-effective solution.

Before you begin, it's important to gather the necessary materials. These include:

New sliding mirror door track
Screws
Drill
Measuring tape
Level

With the materials in hand, you can proceed with the track replacement:

Step 1: Remove the Old Track

Locate the screws that hold the old track in place and remove them. Carefully lift the old track away from the wall, taking care not to damage the wall or doors.

Step 2: Measure and Mark the Position for the New Track

Measure the length of the old track and transfer the measurement to the new track. Mark the position of the screw holes on the wall.

Step 3: Install the New Track

Place the new track over the marked positions on the wall and align it. Drive screws through the screw holes to secure the track to the wall.

Step 4: Reinstall the Sliding Mirror Doors

Lift the doors onto the new track and ensure they slide smoothly. Adjust the doors' height by adjusting the screws located on the bottom of the doors.

Step 5: Level and Align the Doors

Use a level to check if the doors are level. If they're not, adjust the screws on the top and bottom of the doors until they are. Once the doors are level, align them so that they meet evenly in the center.

Tips for a Successful Replacement